KARTONPIYER – AkGaya.az

KARTONPIYER is a plaster used for the production of decorative elements like cornices.

Its working time enables easy application with low wastage.

KARTONPIYER is easy-to-mix.

Because it is a breathable material, KARTONPIYER helps create a healthier environment by stabilizing the humidity.

KARTONPIYER has high strength and surface hardness.

Because of its fine grainsize KARTONPIYER produces a smooth cast surface.

MOLDING GYPSUM / CORNICE

METHOD OF APPLICATION

You can use KARTONPIYER to both make and fix plaster mouldings.

Pour water into a clean bowl. Sprinkle in KARTONPIYER until it just covers the water surface. Wait a few minutes, then mix until a homogeneous mortar is achieved. After mixing, the mortar is ready to be poured into the moulds. The mortar sets in approximately 30 minutes.

Cornices made from KARTONPIYER should be fully dry before being installed.

Clean your tools after use.

RECOMMENDATIONS

Never mix KARTONPIYER with any other product or material.

Do not add any water or plaster to the mortar after mixing

Do not use KARTONPIYER in temperatures below +5°C.

Dry and warm surfaces must be moistened before application.

Dry and hot facades must be heated before watering.

MOLDING GYPSUM / CORNICE

STORAGE CONDITIONS

Store bags of KARTONPIYER in a dry environment, and stack no more than 20 bags high. Do not allow bags to be in contact with the ground or with moisture.

Use KARTONPIYER within 1 year of the date of manufacture.

Poor storage or exceeding the shelf-life may cause the physical properties of KARTONPIYER to deteriorate.