MAKINE SIVA is gypsum-based, ready-to-use spray plaster.
MAKINE SIVA can be directly applied to brick, concrete, aerated-concrete, etc.
One layer is enough for the surface to be painted. There is no need for SATEN finishing plaster.
It has high surface hardness and a brilliant appearance.
It is a non-combustible material. The water in its structure helps to retard fire.
Because it is a breathable material, MAKINE SIVA leads to a healthier environment by stabilizing humidity in the air.
GYPSUM PLASTER MACHINE APPLIED
METHOD OF APPLICATION
Before application, clean away dust and any substances which might prevent adherence to the surface.
Mix MAKINE SIVA in a plastering machine and spray it between the laths. After spraying, smooth the surfaces using a straight edge.
Pre-smooth the surface with a spatula. Wet the surface with a sponge.
Approximately 10 minutes later, polish with a steel trowel to get a brilliant, high-gloss surface.
Approximately 10 minutes later, polish with a steel trowel to get a brilliant, high-gloss surface.
RECOMMENDATIONS
Never mix MAKINE SIVA with any other product or material.
MAKINE SIVA should be applied between 8-30 mm thick.
Do not use MAKINE SIVA in temperatures below +5°C.
Dry and hot surfaces must be moistened before applying MAKINE SIVA.
Keep the plastering machine and all application tools clean.
GYPSUM PLASTER MACHINE APPLIED
STORAGE CONDITIONS
Bags must be stored in a dry place and must not be stacked more than 20 bags high. Do not allow bags to be in contact with the ground or with moisture.
Use MAKINE SIVA within 1 year of the date of manufacture.
Poor storage conditions or exceeding the shelf-life may cause the physical properties of MAKINE SIVA to deteriorate.
TECHNICAL SPECIFICATION
Water/Plaster ratio …… 5– 6 L of water to 10 kg MAKINE SIVA
Setting time starts …………………………………… > 50 minutes
Final setting time …………………………………….. 180 minutes
Coverage ……………. 10-11 kg/m2 for each 1 cm thickness
Compressive strength (min.) ………………. 25 kgf/cm2 (4×4 block)
Flexural strength (min.) …………. 10 kgf/cm2 (4x4x16 block)
Pass 1000 micron sieve ………………………………………. %100
Pass 150 micron sieve (min.) ………………………… %60
Bulk density (powder) ………………………….. 800-850 kg/m3
Dry density ………………………………………. 1150-1250 kg/m3
Thermal conductivity ………………………………….. 0,43 W/mK
Fire classification …………………………………………………….. A1
STANDARD
Reference standard ……………………… TDS-31377-2008
Type …………………………. B4/20/2 Light Weight Gypsum Projection Plaster
PACKAGING
Type ……………………………….. Polypropylene laminated bags
Weight ………………………………………………………………… 30 kg±%1
PROTECT FROM MOISTURE
EASY TO USE
FIRE RESISTANCE: A1
BASE TEMPERATURE
SOUND INSULATION: NPD
FOR INTERIOR USE
THERMAL INSULATION: NPD
USAGE TIME 30 MINUTES
MADE IN TURKMENISTAN
